జర్నల్ ఆఫ్ ప్లాంట్ జెనెటిక్స్ అండ్ బ్రీడింగ్

నైరూప్య

Effect of microwave pretreatment method on the quality of straw pellets and the agglomeration process

Magdalena Dabrowska

Considering the changes in lignocellulose structure, alternative heating is a competition for conventional heating. Radiation causes delignification and partial removal of hemicellulose and increased carbohydrate hydrolysis. Standard heating works on the surface heat exchange whereas microwaves cause that heat is generated as a result of the object's influence in the electromagnetic field. In contrast to conventional heating methods, the effect of microwave heating is almost instantaneous, there is no time to wait for a source of warming up or cooling down. The aim of the work was to acquire a new knowledge and explain the effect of the use of microwaves and the addition of glycerin to lignocellulosic material from straw of different moisture content. The best compaction parameters were selected: 0.1 g mass of single sample, 140°C head heating temperature, 60 mm die thickness. The density of obtained pellets, pressure of compaction, compressive strength analysis and the net and gross calorific value of the material with the addition were determined. Studies have shown that the addition of glycerin to biomass is advantageous when the material is not pre-treated in the microwave. The best density and durability had pellets made of a material with a moisture content of 20%.